hi Nahuel,
would you share the command and its log here.
Please also check the saprouter setting in OSS1.
Regards,
↧
Re: OSS1 error SncSessionInitiatorAK
↧
Re: Create SAP stored procedures Installation error - sap_z_collector error
hi Nitin,
Please go through the following sap note
1076022 - Release planning for Microsoft SQL Server 2008 (R2)
Regards,
↧
↧
Re: CREATE_ENQUEUE_FAILED
Hi Prakash
Open the T code SM30 and delete the entry from TRBAT table. and then try
Thanks
Sriram
↧
Re: Error in RFC OSS
Hi,
Can you please check whether any ports like 3299 is blocked ?
As well as ping check whether the router IP Address & SAP system IP Address resolves each other.
Thanks and Regards,
Vimal
↧
Re: Error in RFC OSS
Hello,
Check just ping your Public and router IP address with port 3299.check whether port 3299 disable or not
WR,
PHB
↧
↧
Re: System Copy: Export Error
Hello.
I noticed that in the past you had a problem I've been facing at present, please be able to help would be grateful. The problem is: I'm trying to generate an export Netweaver 2004s ABAP only. But at the time of preparation of the export generates errors like: ERROR: Select for get_tsp_name failed, rc = 24, was Tabart USERerror message returned by DbSl:ORA-01403: no data foundERROR: could not generate DBSIZE.xmlPlease tell me how to solve the case, as has already been redone user OPS $ SAPUSER as table and related notes.
My e-mail: wesselka@gmail.com
thank you.
↧
Re: Error: NSP/DVEBMGS00 [ABAP: UNKNOWN] did not start after 10:10. Giving up
Dear All,
The main problem is that you should increase your page file size which can be adjusted through your computer performans settings.
Just follow my informations:
1- Click right to My Computer
2- Properties->Advanced System Settings
3- in Performance sub-task -> Settings -> Advanced
4- in Virtual Memory sub-task -> Change page file size to minimum 10240 and maximum 20480 as can be seen in the picture below.
5-Then click OK and restart your session.
in conclusion, problem solved.
Best Regards.
↧
Error connection of SAPROUTER using linux
Hello All,
Thank you for the quick solution, however, upon checking the SAP license, our certificate is still valid and up to date. I'm just worried that our saprouter is still down for i don't know reason. i got this error when I'm trying to execute the niping
# deny routes from host1 to host2 serviceX
# deny all routes from host3
# permit routes from anywhere to any host using serviceX
# permit all routes from/to addresses matching 155.56
# permit ... with 3rd byte matching 1011xxxx
# permit routes from host4 to host5 if password xxx supplied
# permit information requests from host6
# permit native-protocol-routes to non-SAP-server telnet
# permit ... excluding native-protocol-routes (SAP-servers only)
# permit ... if number of preceding/succeeding hops (SAProuters) <= 0/*
# permit SNC-connection with partnerid = 'sncname1' to any host
# permit all SAP-SAP SNC-connections to host11
# deny all SNC-connections with partnerid = 'sncname "abc'
# open connects to host11 with SNC enabled and partnerid = 'sncname3'
# first match [host/sncname host service] is used
# permission is denied if no entry matches
# service wildcard (*) does not apply to native-protocol-routes
i've also tried to start the router but unfortunately i got also an error
please check this one
| [root@saprouter ~]# ps -ef | grep saprouteravahi | 928 | 1 0 10:44 ? | 00:00:00 avahi-daemon: running [saprouter.local] |
| root | 2577 2334 0 15:03 pts/0 | 00:00:00 grep --color=auto saprouter |
what should i do 
↧
Re: URGENT HELP NEEDED - changing the SID
can you please post trans.log
regards,
kaushal
↧
↧
Re: URGENT HELP NEEDED - changing the SID
Hello Gentlemen,
sorry, this thread was approved toooooooo late... Meanwhile I solved the problem by replacing every occurrence of the old SID with the new one in the registry...
Uninstalling and reinstalling SAP might be the correct approach, but we were under time pressure to complete this task...
↧
Error in RFC OSS
Hi All
I opened a new discussion about this issue because it seems to be a SAPRouter problem.
You can follow the new one in
http://scn.sap.com/message/14251333#14251333
Thank you all very much for all your answers.
↧
Re: OSS1 error SncSessionInitiatorAK
Hi Abdul
in PIN code I put 1234. The same number I used to register the licence.
The saprouter was configured and working, then some day stop working. I don´t realise until I need to use the SNOTE TRx.
Here is the command
Regards
↧
Re: OSS1 error SncSessionInitiatorAK
hi Nahuel,
Please also run the following command and send me log.
sapgenpse get_my_name -v -n validity
Regards,
↧
↧
Re: JDBC drivers in PI 7.1X
If you install the new version in Windows it will overwrite some OS level things that will cause you problems. You might be able to get away with it be adding the 2.0 drivers directly into PI. I wrote a article on how to do this with AS\400 drivers (the process works for any JDBC drivers). You can then change your legacy connections to use the internal JDBC driver for testing. Assuming that works, then you should be able to install the 4.0 drivers in Windows.
http://scn.sap.com/community/pi-and-soa-middleware/blog/2013/06/24/as400-jdbc-on-pi
↧
Re: OSS1 error SncSessionInitiatorAK
Hi Abdul
Sorry I forget to post the log, here is the print screen.
Regards.
↧
Re: SAP login restriction to diff IP
Hello A.Sithanandan,
If this is a ABAP system, then you can use the logon user exit to check and restrict the access by yourself; there is no standard way to do this.
I hope this helps,
Cris
↧
Re: OSS1 error SncSessionInitiatorAK
Dera Nahuel,
Please login with SIDadm and start the saprouter via saprouter.exe. It is started successfully then check the error again.
pleaase also check that saprouter service is running or not?
Regards,
↧
↧
Re: SAP login restriction to diff IP
You have to use Access Control Lists (ACL):
http://help.sap.com/saphelp_nw73/helpdata/en/d0/a4956abd904c8d855ee9d368bc510b/content.htm
Regards,
Americo.
↧
Re: sap gateway not found, partner :sapgw00 not found
Hello,
What is the ip before the 3300
.........:3300
What error do you get when you run this?
niping -c -H ip address :3300
regards,
John Feely
↧
Re: Netweaver 7.4 on windows - SAP HANA
What timezone do you have set?
Not only is time important, but is the date the app and DB servers set to the same day/month/year?
If you have a Windows domain configured, be aware that this will enforce certain time related settings; timezone is typically not one of them, however Windows will let the clock skew up to 8 mins before it will force the client to check with the domain and update the clock.
↧