Hi Leandro ,
You need to first Configure the solution manager to download stack.xml
Logon to 001 client of the solution manager , go to transaction SU01 and add all the following roles to your user-id also add SAP_ALL to the profiles .
SAP_SM*
Then execute the transaction SOLMAN_SETUP or SOLMAN_WORKCENTER .
If you still face issues let us know
Thanks ,
Manu
Hello,
Thank you. I am now running solmand_setup, however i did not setup OSS communication and SAP Router. I have already opened the messages to SAP to allow connection.
Thank you.
Leandro
Dear Sriram
I created in the same manner
I created Role SAP SID (or services and applications) in fail over cluster manager
I give the SAPINST_USE_HOSTNAME= virtual host name
While providing the entries in SWPM
SAP SYSTEM SID, Virtual host name (or network name), Network , and shred disk selection
SWPM thrown an error, the given Virtual host name is already maintained in SAP SID role.
Thanks
Regards
Sudheer k
Hi
After created the virtual host are you ping the host from another system by virtual host and ip address?
BR
SS
Hi Sriram
Yes, i can able to ping IP Address and host name.
But While providing the entries in SWPM
SAP SYSTEM SID, Virtual host name (or network name), Network , and shred disk selection
SWPM thrown an error, the given Virtual host name is already maintained in SAP SID role.
Thanks
Regards
Sudheer k
Yes. Please delete the virtual hostname and let SWPM installs it.
I faced such kind of problem and I just deleted the virtual hostname in the MSCS Failover management and it worked.
Take a screenshot for future use before deleting.
The best things is to use a current SWPM version and read the installation guide carefully!
SAPINST_USE_HOSTNAME
parameter must not be used in current MSCS installations!
If you need to prepare a Cluster Role/Group it is documented in the installation guide otherwise SWPM will create it. SWPM will missbehave if a Cluster Group or Cluster Resource he intents to create already exists.
regards
Peter
Dear Abhishek,
In addition to Sriram's RCA you may also check other systems which are connected to EP.
If those are also not getting opened then you may want to check parameter gw/acl_mode.
Warm Regards,
Sumit Jha
Hi Sahil
Could you refer the SCN thread replied by Karl-Heinz
Virtual memory required by SAP system component?
BR
SS
Dear Mentors
we configured Microsoft fail over cluster service for two nodes to
install an SAP High-Availability for production environment.
Operating system : windows server 2012 R2 standard
Storage : SAS disk with mapped iSCSI LUN as Raw LANS
we have configured disks in RAID level 10
SAP recommends Cluster validation report should not contain any warning
and errors according to installation guide
You must validate your failover cluster configuration by running the
command test-cluster in a PowerShell
The Failover Cluster Validation Report must not show any warnings and
errors.
But we are getting following warnings after running test-cluster report.
Persistent Reservation Registration key 0x1000100b2 for Test Disk 1
reservation holder node orenprdB.oren.in was not removed by the call to
REGISTER using RESERVATION KEY 0x1000100b2 and SERVICE ACTION
RESERVATION
KEY 0x1000100c2.
Persistent Reservation Registration key 0x100b2 for Test Disk 0
reservation holder node orenprdB.oren.in was not removed by the call to
REGISTER using RESERVATION KEY 0x100b2 and SERVICE ACTION RESERVATION
KEY
0x100c2.
Persistent Reservation Registration key 0x3000100b2 for Test Disk 3
reservation holder node orenprdB.oren.in was not removed by the call to
REGISTER using RESERVATION KEY 0x3000100b2 and SERVICE ACTION
RESERVATION
KEY 0x3000100c2
Persistent Reservation Registration key 0x2000100b2 for Test Disk 2
reservation holder node orenprdB.oren.in was not removed by the call to
REGISTER using RESERVATION KEY 0x2000100b2 and SERVICE ACTION
RESERVATION
KEY 0x2000100c2.
Test Disk 0 does not support SCSI-3 Persistent Reservations commands
needed by clustered storage pools that use the Storage Spaces
subsystem.
Some storage devices require specific firmware versions or settings to
function properly with failover clusters. Contact your storage
administrator or storage vendor for help with configuring the storage
to function properly with failover clusters that use Storage Spaces.
Test Disk 1 does not support SCSI-3 Persistent Reservations commands
needed by clustered storage pools that use the Storage Spaces
subsystem.
Some storage devices require specific firmware versions or settings to
function properly with failover clusters. Contact your storage
administrator or storage vendor for help with configuring the storage
to function properly with failover clusters that use Storage Spaces.
Test Disk 2 does not support SCSI-3 Persistent Reservations commands
needed by clustered storage pools that use the Storage Spaces
subsystem.
Some storage devices require specific firmware versions or settings to
function properly with failover clusters. Contact your storage
administrator or storage vendor for help with configuring the storage
to function properly with failover clusters that use Storage Spaces.
Test Disk 3 does not support SCSI-3 Persistent Reservations commands
needed by clustered storage pools that use the Storage Spaces
subsystem.
Some storage devices require specific firmware versions or settings to
function properly with failover clusters. Contact your storage
administrator or storage vendor for help with configuring the storage
to function properly with failover clusters that use Storage Spaces.
Please suggest us, can we skip this warnings
Thanks
Reagrds
Sudheer k
Dear Vimal/Peter
Thanks for reply
I created cluster role like SAP SID
I give SAPINST_USE_HOSTNAME=virtual host name , before continuing SWPM
But While providing the entries in SWPM
SAP SYSTEM SID, Virtual host name (or network name), Network , and shred disk selection
i deleted Cluster role SAP SID, and i continued SAP installation.
whether it is correct method to created virtual host name for global host preparation.
please verify this sap note also
962955 - Use of virtual or logical TCP/IP host names
<ip1> physhost.domain. corp physhost
<ip2> virthost1.domain. corp virthost
If you only use the hostst file, you must enter the information on all servers that are to use the new virtual host.
You can test the IP addresses <-> TCP/IP host name resolution by using the SAP tool niping with the following syntax:
niping -v -H <virthost>
In the output, you will find the resolutions TCP/IP host name -> IP address (NiHostToAddr) and IP address -> TCP/IP host name (NiAddrToHost) of the local host name and of the transferred host name <virthost>. The result for NiAddrToHost for the IP address of <virthost> must correspond again to the transferred host name <virthost>.
Note 799428 describes where you can find the latest version of niping.
Thanks
Regards
Sudheer k
Hi,
what is about asking Microsoft or Google it:
http://technet.microsoft.com/en-us/library/cc771259.aspx#PersistentReservation
regards
Peter
Hi,
I can not remember that in the current installation guide for the Windows Failover Cluster you are ask to prepare a Globalhost?
The Windows Failover Cluster is acting as a global host - just install the system on the Failover cluster that's it.
please read the guide - everything you need for the failover cluster installation is described.
regards
Peter
Dear Peter
I verified installation it is clearly saying SAPINST_USE_HOSTNAME is not required
after maintaining hostname and ip address in DNS server our issue is solved.
I started SWPM
Dear Peter
I ask about Microsoft cluster validation report contain warning Storage Spaces Persistent Reservation, can I continue for SAP installation.
Because SAP Installation guide mentioned :
You must validate your fail over cluster configuration by running the command test-cluster in a PowerShell
The Failover Cluster Validation Report must not show any warnings and errors.
I Had confusion whether to go further (even though we are not using cluster pool storage spaces in windows server 2012 R2)
Please find reference links we can safely ignore the warning, if your not using Persistent Reservation Storage Spaces
http://blogs.msdn.com/b/clustering/archive/2013/05/24/10421247.aspx
Thanks
Regards
Sudheer k
Hi,
I would like to Install the IDES R/3 4.7. Do we have 4.7 Available for download in the market place? I can't find it in marketplace, Please suggest the path.
Regards,
Suresh Linga.
Hello,
SAP R/3 Enterprise 47 extended support did end on March 31, 2013, thus you won't be able to find installation media anymore... especially for an IDES.
https://support.sap.com/maintenance
Best regards
Hi Suresh
You can use any one of the latest version SAP Ides ECC 6 and above?
BR
SS
Dear
Support for SAP R/3 Enterprise 47 extended support has expired so there is no possibility to find that in Market place
You can go for IDES EHP6 if you sufficient ram and Hard drive space
Regards
SAP GUI740 使用空格无法读取输入过的记录,请帮忙看看,已做过以下操作.
1. 已经设置过了保存记录为开
2. 网络已经设置为高速网络.
以下是SAP GUI 信息以及客户端信息
