The system has already installed an antivirus, i removed the firewall protection.
The system has 4GB of RAM with 500GB HDD.
↧
Re: SAP Logs out/Shuts Down Unexpectedly
↧
Re: sap logonpad
Hello,
Get the software for SAP GUI ,install it.go to the c: programfiles/sap/frontend/sapgui folder , in it there is an exe for saplgpad.exe...Run that
check that
regards
pandit
↧
↧
Widlcard certificate import issue
Hi Gurus,
An wildcard certificate (valid for multiple servers) has to be imported from STRUST, in multiple servers
This certificate is signed by Verizon
But we are able to import this wildcard certificate ONLY into the system where the initial PSE certificate generate request, was generated
I have referredSAP Note 1473710 - STRUST: How to Export/Import a PSE from/to STRUST but this is not helpful
Can you please advise on this
R..../-
↧
SAP router
Dear all,
I am tryng to setup our Solman’s connection to OSS for continuing the initial setup, but I came across an error which I can’t solve and can’t find any solution on the internet.
Issue- 1. Unable to START sap router services
2. SAPOSS rfc connection test failed
3. tcode -OSS1 = unable to connect ( message popup- running in defult connection )
error - DEV_ROUT
Sat May 30 13:54:50 2015
*** ERROR => SncPEstablishContext() failed for target='p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE' [sncxxall.c 3585]
*** ERROR => SncPEstablishContext()==SNCERR_GSSAPI [sncxxall.c 3551]
GSS-API(maj): Miscellaneous failure
GSS-API(min): A2200223:Peer certificate path not trusted
Unable to establish the security context
target="p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE"
<<- SncProcessInput()==SNCERR_GSSAPI
*** ERROR => NiSncIProcIn: SncProcessInput failed (sncrc=-4;000000000258F300;1941) [nisnc.c 1010]
*** ERROR => SncPEstablishContext() failed for target='p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE' [sncxxall.c 3585]
*** ERROR => SncPEstablishContext()==SNCERR_GSSAPI [sncxxall.c 3551]
GSS-API(maj): Miscellaneous failure
GSS-API(min): A2200223:Peer certificate path not trusted
Unable to establish the security context
target="p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE"
<<- SncProcessInput()==SNCERR_GSSAPI
*** ERROR => NiSncIProcIn: SncProcessInput failed (sncrc=-4;000000000258F300;1941) [nisnc.c 1010]
RFC connection test screen shot provide below please find.
SAP ROUTER Service
↧
Re: SAP router
Hi,
Hope you already been aware about New SAP Router certificate policy and followed SAP Note 2131531 - New Root Certification Authority for saprouter certificates
If not kindly follow the steps as mentioned under SAP Note 2131531 & doc for successful router connections as well as SAPOSS connections.
GSS-API(min): A2200223:Peer certificate path not trusted |
You could refer SAP Note 1867829 - List of SNC Error Codes
In my opinion best would to follow SAP Note first,if still issue persists re-share the dev_rout & SAPOSS test connection results.
Good luck !!
↧
↧
Re: SAP router
Dear gaurav,
Still i am getting the same error.
Thanks and regards
SANDEEP
↧
Re: SAP router
Hi Sandeep,
Could you re-share dev_rout & SAPOSS test connection results.
Regards,
↧
Re: SAP router
Dear gaurav,
Thank you for your valuable response, i restarted the server and my OSS connection started working, But in Tcode- OSS1 its showing ( default connection ) and its not working.
Please find the screenshot.
Once again thanks garurv, if possible please share some more views regarding OSS1 tcode.
Thanks and regards
SANDEEP
↧
Re: SAP router
Hi,
Could you check correct configurations or values under OSS1,if possible try to delete SAPOSS RFC from SM59 & recreate it via OSS1 transaction to test again .
Regards,
↧
↧
Re: SAP router
Dear gaurav,
I tried to recreate SAPOSS rfc connection by useing OSS1 and its created but still the OSS1 is not working, but my rfc connection working.
can you give some views on - SAP stop OSS1 tcode ( as per sap note 33125 )
Thanks and regards
SANDEEP
↧
Re: SAP router
Hi Sandeep,
can you give some views on - SAP stop OSS1 tcode ( as per sap note 33125 )
The correct SAP Note here is 33135 - Guide for OSS1
If possible could you share OSS1 snap-shot,meanwhile i suggest you to refer recommendations under
Appendix A
Hope this will help you.
Good luck !!
↧
Re: Microsoft Outlook express. dbx: internal error
Hi
1. Could you share the detail information if possible screen shot?
2. Could you refer the links
Microsoft Outlook express. dbx: internal error
Microsoft Outlook express dbx: internal error - Spiceworks
BR
SS
↧
Re: SAP router
Dear gaurav,
Sorry i cant understand your comment.
↧
↧
Re: SAP router
Hi Sandeep,
OSS1 screen seems fine here,i would suggest you to follow previously mentioned SAP Note 33135,part Appendix A for the resolution.
Regards,
↧
Re: Widlcard certificate import issue
Hi Sandy,
please check the following.
Go to STRUST
double click on "SSL Server Standard"
Then check the certificate on the right side (serial number).
After that double click on the applicationservername shown under "SSL Server Standard".
for example: myservername_SID_00
Check again the certificate on the right side (serial number).
Are they the same?
If not, you have 2 certificates, one on system level and one on server level.
Then it depends from which certificate you created the cert sign request.
Next check:
Right click on SSL Server Standard - > and select "change".
There you can see, if you have instance specific certificates.
If you want to use only one certificate (systemwide) for all your appservers, the "Instance-Specific PSEs" List must be empty.
For example, a signed certificate (the "self signed" text is gone).
Regards
Manuel
↧
installation stuck off
APPRECIATE IF ASSITANCE PROVIDED TO INSTALL WITHOUT FORMAT MY SYS
m TRY to install sap 703 on licenced win 8.1, but it display error on IMPORT ABAP, my log files are
sapinst.log
ERROR 2015-06-01 17:08:04.095
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.
ERROR 2015-06-01 17:08:04.111
FCO-00011 The step runMigrationMonitor with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|onehost|0|NW_CreateDBandLoad|ind|ind|ind|ind|createdbandload|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|abapload|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR ( Last error reported by the step: Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.).
INFO 2015-06-01 17:08:04.517
Creating file C:\Program Files\sapinst_instdir\NW703\AS-ABAP\ADA\CENTRAL\__instana_tmp.xml.
sapssexc_2
C:\usr\sap\NSP\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/720_REL/src/R3ld/R3load/R3ldmain.c#13 $ SAP
C:\usr\sap\NSP\SYS\exe\uc\NTAMD64\R3load.exe: version R7.20/V1.4 [UNICODE]
Compiled Mar 20 2012 14:38:25
patchinfo (patches.h): (0.200) MaxDB database SAP DDIC inconsistency /MAXDB/DUMMYTAB<No> (note 1635572)
process id 5168
C:\usr\sap\NSP\SYS\exe\uc\NTAMD64\R3load.exe -i SAPSSEXC_2.cmd -dbcodepage 4103 -l SAPSSEXC_2.log -nolog -c 50000 -force_repeat -loadprocedure dbsl
DbSl Trace: Connect to database failed, rc = -4001 (POS(1) Unknown user name/password combination in operational state ADMIN)
(DB) ERROR: db_connect rc = 256
DbSl Trace: Connect to database failed, rc = -4001 (POS(1) Unknown user name/password combination in operational state ADMIN)
(DB) ERROR: DbSlErrorMsg rc = 99
C:\usr\sap\NSP\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
C:\usr\sap\NSP\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20150601170737
import_monitor_java
java version "1.4.2_32"
Java(TM) 2 Runtime Environment, Standard Edition (build 4.1.012)
SAP Java Server VM (build 4.1.012 1.6-b03, Oct 21 2011 14:18:45 - 41_REL - optU - windows amd64 - 6 - bas2:161688 (mixed mode))
Import Monitor jobs: running 1, waiting 1, completed 30, failed 0, total 32.
Loading of 'SAPSSEXC_2' import package: ERROR
Import Monitor jobs: running 0, waiting 1, completed 30, failed 1, total 32.
↧
Re: installation stuck off
Hi Abdul,
Are you able to connect to the MAXDB database with control user?
Also do check the status of MAXDB database state.
With Regards
Ashutosh Chaturvedi
↧
↧
Re: installation stuck off
maxdb is unable to start. (fail to start)
↧
Re: installation stuck off
Hi Abdul,
can you paste the error?
Also do check the below link related to MAXDB database
With Regards
Ashutosh Chaturvedi
↧
Re: installation stuck off
dear ashutosh
sapinst log is
ERROR 2015-06-03 22:27:59.637
FCO-00011 The step runMigrationMonitor with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|onehost|0|NW_CreateDBandLoad|ind|ind|ind|ind|createdbandload|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|abapload|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR ( Last error reported by the step: System call failed. Error 1326 (The username or password is incorrect.
) in execution of system call 'LogonUser' with parameter (nspadm, aqadir, ********, LOGON32_LOGON_INTERACTIVE,LOGON32_PROVIDER_DEFAULT,&hUserToken), line (403) in file (synxcuser.cpp), stack trace: iaxxejsctl.cpp: 146: EJS_ControllerImpl::executeScript()
d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\ejs\iaxxejsbas.hpp: 461: EJS_Base::dispatchFunctionCall()
iaxxejsexp.cpp: 178: EJS_Installer::invokeModuleCall()
iaxxbprocess.cpp: 253: CIaOsProcess::setEffectiveUserId_impl()
synxccuren.cpp: 712: CSyCurrentProcessEnvironmentImpl::setEffectiveUser(PSyUserInt,iastring)
synxccuren.cpp: 573: CSyCurrentProcessEnvironmentImpl::setUser()
synxcuser.cpp: 291: CSyUserImpl::getPrimaryToken(const iastring & password, bool & restrictedToken);
.).
INFO 2015-06-03 22:28:00.126
Creating file C:\Program Files\sapinst_instdir\NW703\AS-ABAP\ADA\CENTRAL\__instana_tmp.xml.
↧